Kia Cadenza YG: Engine Control System / Fuel Pressure Control Valve (FPCV) Description and Operation

Kia Cadenza YG 2016-2021 Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Pressure Control Valve (FPCV) Description and Operation

Description
Fuel Pressure Control Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine condition.

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between the VIS valve terminals 1 and 2.

    Specification ItemSpecificationCoil Resistance (Ω)1.04 ~ 1.27 [23°C(73.4°F)]

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Pantoscopic Camera Repair procedures

    Removal Front Pantoscopic Camera 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 3. Remove the pantocscpic camera (B) after loosening the mounting screws and connector (A).

    Kia Cadenza YG 2016-2021 Service Manual: Description and Operation

    Description BSD is a system that uses two magnetic wave radar sensors attached on the rear bumper to measure the distance from the following vehicles and provides the sensing and (visual and auditory) alarm of any vehicle coming into the blind spot.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.0217