Kia Cadenza YG: Interior / Interior Trim Components and Components Location
| Components |
| 1. Front pillar trim 2. Center pillar upper trim 3. Center pillar lower trim 4. Rear pillar trim | 5. Cowl side trim 6. Front door scuff trim 7. Rear door scuff trim 8. Rear package tray trim |
Replacement Sunvisor Replacement • When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Replacement Door Scuff Trim Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Condenser Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2. Check the condenser connections for leakage, and repair or replace it, if required.
Kia Cadenza YG 2016-2021 Service Manual: Blower Unit Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower unit.(Refer to HA group – heater unit). 3. Remove the blower unit (A) from the heater unit after loosening a mounting bolt and 3 screws. Make sure that there is no air leaking out of the blower and duct joints.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Body Control Module (BCM) Description and Operation
- Automatic Transaxle System
- Engine Mechanical System
- New on site
- Most important about car
