Kia Cadenza YG: Rear Axle Assembly / Rear Hub - Carrier Components and Components Location

Kia Cadenza YG 2016-2021 Service Manual / Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier Components and Components Location

Components

1. Rear Carrier Assembly
2. Parking Brake Assembly
3. Rear Hub Assembly
4. Rear Brake Disc

    Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from rear hub.

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Surround View Monitoring Switch Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console upper cover. (Refer to Body - "Floor Console Assembly") 3. Disconnect the console upper cover connector (A). 4. Remove the cup holder assembly (A) after loosening the mounting screws.

    Kia Cadenza YG 2016-2021 Service Manual: Receiver-Drier Repair procedures

    Replacement 1. Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser. Tightening torque : 9.8~14.7N.m (1.0~1.5kgf.m, 7.2~10.8 lb-ft) 2. Remove the desiccant (A) from condenser using a long nose plier.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.0356