| Components |

| 1. SET - switch 2. RES + switch 3. SCC switch | 4. CANCEL switch 5. CRUISE switch |
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the front bumper. (Refer to Body - "Front Bumper") 3.
Circuit Diagram
Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/ recycling/ charging station. 3. When the engine is cool, drain the engine coolant from the radiator. 4. Remove the expansion valve cover (A).
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower unit.(Refer to HA group – heater unit). 3. Remove the blower unit (A) from the heater unit after loosening a mounting bolt and 3 screws. Make sure that there is no air leaking out of the blower and duct joints.