Kia Cadenza YG: Engine Electrical System / Smart Cruise Control System
- General Safety Information and Caution
- Schematic Diagrams
- Description and Operation
- Smart Cruise Control Unit Description and Operation
- Smart Cruise Control Unit Specifications
- Smart Cruise Control Unit Schematic Diagrams
- Smart Cruise Control Unit Repair procedures
- Smart Cruise Control Switch Components and Components Location
- Smart Cruise Control Switch Schematic Diagrams
- Smart Cruise Control Switch Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air-bag module from the steering wheel. (Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring") 3.
Smart Cruise Control Be careful when driving the vehicle using the smart cruise control system as follows. • The smart cruise control system may have limits to detect distance to the vehicle ahead due to road and traffic conditions.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Lane Departure Warning System (LDWS) Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the LDWS unit cover (A). 3. Remove the LDWS unit connector (A). 4. Remove the LDWS unit after widening the mounting clips. Installation 1. Install the LDWS unit. 2.
Kia Cadenza YG 2016-2021 Service Manual: Blower Resistor Repair procedures
Inspection 1. Measure terminal - to - terminal resistance of blower resistor. 2. If measure resistance isnot within specification, the blower resistor must be replaced. Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower cover (A) and then disconnect the connector (B).
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Engine Mechanical System
- Driveshaft and axle
- Components and Components Location
- New on site
- Most important about car
