Kia Cadenza YG: Steering System / Special Service Tools
| Special Service Tools |
| Tool Name / Number | IIIustration | Description |
| Steering whell puller 09561-11001 |
| Remove the steering wheel from the column shaft. |
| Lower arm ball joint remover 0K545-A9100 |
| Removal of front lower arm from front axle |
General Information Specifications ItemSpecificationTypeMotor Driven Power SteeringSteering gearTypeRack & PinionRack stroke148mm (5.8268 in.
Inspection Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels can face straight ahead. 2. Measure the distance the steering wheel can be turned without moving the front wheels.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Compressor Repair procedures
Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative cable from the battery. 3. Recover the refrigerant with a recovery/charging station.
Kia Cadenza YG 2016-2021 Service Manual: Photo Sensor Repair procedures
Inspection 1. Ignition "ON" 2. Using the scan tool. 3. Emit intensive light toward photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher intensive light and reduce with lower intensive light.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- ETC (Electronic Throttle Control) System Description and Operation
- General Information
- Engine Control / Fuel System
- New on site
- Most important about car
