Kia Cadenza: Lane Following Assist (LFA) / LFA operation
.jpg)
With the ENGINE START/STOP button
is
in the ON or START position, the
Lane Following Assist can be activated
by pressing the button.
Lane Following Assist is designed to
center the vehicle in the chosen lane
by using a front mounted camera on
top of the windshield.
It can only become active in combination
with Smart Crui ...
When the system is activated, the
indicator () on the cluster will
illuminate.
While LFA is activated, if press the
button again, the system is
released and indicator () light will
go off ...
Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OTS connector.
3.
Remove the OTS. (Refer to "Removal")
4.
After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 2.
5.
Check that the resistance is within t ...
Replacement
Seat Assembly Replacement
1.
Remove the rear seat cushion (A).
2.
Disconnect the rear seat cushion heater connectors (A).
3.
After loosening the mounting bolts, then remove the rear seat back (A).
Tightening torque :
16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)
4 ...