Kia Cadenza: Lubrication System / Oil Level Gauge & Pipe Repair procedures

Kia Cadenza YG 2016-2024 Service Manual / Engine Mechanical System / Lubrication System / Oil Level Gauge & Pipe Repair procedures

Removal and Installation

Remove the oil level gauge rod (A) and the oil level gauge (B).

Tightening torque:

18.6 ~ 22.6N.m (1.9 ~ 2.3kgf.m, 13.7 ~ 16.6lb-ft)

When installing, apply engine oil to the O-ring and take care the O-ring not to be damaged.

Always use a new O-ring.

2.	Installation is in the reverse order of removal.

Oil Level Gauge & Pipe Components and Components Location

Components 1. Oil level gauge2. Oil level gauge pipe3. O-ring ...

Intake And Exhaust System

...

Other information:

Kia Cadenza YG 2016-2024 Owners Manual: Limitations of the System

LFA may operate prematurely even if the vehicle does not depart from the intended lane, OR, LFA may not assist your steering or warn you if the vehicle leaves the intended lane under the following circumstances: When the lane and road conditions are poor It is difficult to distingui ...

Kia Cadenza YG 2016-2024 Owners Manual: Starting the engine with a smart key

1.Carry the smart key or place it inside the vehicle. 2.Make sure the parking brake is firmly applied 3.Place the shift lever in P (Park). Depress the brake pedal fully. You can also start the engine when the shift lever is in the N (Neutral) position. 4.Press the ENGINE START/STOP ...