Kia Cadenza YG: Smart Cruise Control System / Smart Cruise Control Unit Description and Operation

Kia Cadenza YG 2016-2021 Service Manual / Engine Electrical System / Smart Cruise Control System / Smart Cruise Control Unit Description and Operation

Description
The smart cruise control unit is installed on the front right side of the chassis.A radar sensor is embedded in the front section of the unit. This sensor detects vehicles and objects in front of the vehicle.The radar sensor can detect up to 64 objects ahead of a vehicle. This sensor communicates with the dashboard, warning buzzer, smart cruise control switch, Electronic Stability Program (ESC), ECM, and TCM via CAN communication.The sensor controls vehicle speed through CAN communication between the Electronic Stability Program (ESC) system and the ECM and TCM.

    Description The smart cruise control system allows a driver to program the vehicle to control the speed and following distance detecting the vehicle ahead without depressing the brake pedal and the accelerator pedal.

    Specification ItemSpecificationPower supply(V)12Operation voltage (V)9 ~ 16

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Repair procedures

    Removal 1. Remove the trunk trim in the trunk after removing the screws and clips. (Refer to Body - "Trunk") 2. Remove the camera holder (A) as shown arrow direction, and then remove the back view camera (B). Installation 1. Install the back view camera and camera holder.

    Kia Cadenza YG 2016-2021 Service Manual: Auto defoging sensor Repair procedures

    Inspection 1. Press the OFF switch more then 4 times within 2 seconds while pressing the MODE switch. DisplayFail description00Normal23Auto defog sensor OPEN24Auto defog sensor SHORT43Defog door potentiometer OPEN/SHORT44Defog door potentiometer * Diagnostic procedure refer to DTC code.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.0192