Kia Cadenza YG: Seat Belt Pretensioner / Emergency Fastening Device (EFD) Components and Components Location
| Components |
Description Emergency Fastening Device (EFD) operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision.
Removal 1. Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work. 2. The seat belt emergency fastening device (A) be removed after pushing the lock pin (B) as arrow direction.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Auto defoging actuator Repair procedures
Inspection 1. Ignition "OFF”. 2. Disconnect the connector of auto defog control actuator. 3. Verify that the auto defog control actuator operates to the defrost ON mode when connecting 12V to the terminal 3 and grounding terminal 7. 4.
Kia Cadenza YG 2016-2021 Service Manual: Blower Motor Repair procedures
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor voltage is not operated well, substitute with a known-good blower motor and check for proper operation. 3. If the problem is corrected, replace the blower motor.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Mode Control Actuator Repair procedures
- Engine Control / Fuel System
- Rail Pressure Sensor (RPS) Schematic Diagrams
- New on site
- Most important about car
