Kia Cadenza YG: Blind Spot Detection System / Blind Spot Detection Switch Components and Components Location

Kia Cadenza YG 2016-2021 Service Manual / Body Electrical System / Blind Spot Detection System / Blind Spot Detection Switch Components and Components Location

Circuit Diagram

    Description To sense the cars exactly in the next lane with the radar, the direction of the sensor and the direction of the vehicle have to align.

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the passenger compartment junction box cover. 3. Remove the driver side cover (A).

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Repair procedures

    Inspection Tolerance Calibration Tolerance calibration compensates for the error margins of surround view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance calibration if you do any of the following.

    Kia Cadenza YG 2016-2021 Service Manual: Blower Unit Repair procedures

    Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower unit.(Refer to HA group – heater unit). 3. Remove the blower unit (A) from the heater unit after loosening a mounting bolt and 3 screws.     Make sure that there is no air leaking out of the blower and duct joints.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.0253