Kia Cadenza YG: ESC(Electronic Stability Control) System / ESC OFF Switch Description and Operation
| Description |
| 1. |
The ESC OFF switch is for the user to turn off the ESC system. |
| 2. |
The ESC OFF lamp is on when ESC OFF switch is engaged. |
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the floor console. (Refer to the Body - "Console") 3.
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the passenger compartment juction box cover. 3.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Height Sensor Repair procedures
Removal Height Sensor 1. Disconnect the negative (-) battery terminal. 2. Remove the height sensor linkage (A) installed on the front axle and rear axle. [Front] [Rear] Installation Height Sensor 1. Install the height sensor assembly after connecting the connector.
Kia Cadenza YG 2016-2021 Service Manual: Mode Control Actuator Repair procedures
Inspection 1. Ignition "OFF” 2. Disconnect the connector of mode control actuator. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to the terminal 3and grounding terminal 7. 4. Verify that the mode control actuator operates to the vent mode when connecting in the reverse.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Suspension System
- Specifications
- Body (Interior and Exterior)
- New on site
- Most important about car
