Kia Cadenza YG: Steering wheel / Heated Steering wheel Repair procedures

Kia Cadenza YG 2016-2021 Service Manual / Steering System / Steering wheel / Heated Steering wheel Repair procedures

Inpection
1.
Measure a resistance of NTC and Heated pad.
–
NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C)
–
Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω ± 10%
2.
Measure a temperature.
–
The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute
–
The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute
–
At that time switch on, all measure point (1~8)

    System Circuit Diagram Terminal Function HousingPinFunctionWire colorPadAGNDBackBHEATERYellowCNTC+Back / RedDNTC-BackRemotecontrolAGNDBackBBATRedCLEDGreenDSWITCHWhite

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: A/C Pressure Transducer Description and Operation

    Description A/C pressure transducer convert the pressure value of high pressure line into voltage value after measure it. By converted voltage value, engine ECU controls cooling fan by operating it high speed or low speed. Engine ECU stop the operation of compressor when the temperature of refrigerant line is so high or so low irregularl

    Kia Cadenza YG 2016-2021 Service Manual: Mode Control Actuator Repair procedures

    Inspection 1. Ignition "OFF” 2. Disconnect the connector of mode control actuator. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to the terminal 3and grounding terminal 7. 4. Verify that the mode control actuator operates to the vent mode when connecting in the reverse.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.0238