Kia Cadenza YG: Steering wheel / Heated Steering wheel Schematic Diagrams

Kia Cadenza YG 2016-2021 Service Manual / Steering System / Steering wheel / Heated Steering wheel Schematic Diagrams

System Circuit Diagram

Terminal Function
Housing
Pin
Function
Wire color
Pad
A
GND
Back
B
HEATER
Yellow
C
NTC+
Back / Red
D
NTC-
Back
Remote
control
A
GND
Back
B
BAT
Red
C
LED
Green
D
SWITCH
White

    Description When manually selected, the heated steering wheel system improves the thermal comfort of the driver by heating the steering wheel. Heated control unit Heated pad Specifications ItemSpecificationVoltage13.

    Inpection 1. Measure a resistance of NTC and Heated pad. – NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C) – Heated pad resistance (Yellow, Black) - 1.

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Height Sensor Repair procedures

    Removal Height Sensor 1. Disconnect the negative (-) battery terminal. 2. Remove the height sensor linkage (A) installed on the front axle and rear axle. [Front] [Rear] Installation Height Sensor 1. Install the height sensor assembly after connecting the connector.

    Kia Cadenza YG 2016-2021 Service Manual: Blind Spot Detection Unit Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting screws.     Take care not to separate the bracket from rear bumper when removing the BSD sensor.

    Categories

     
    Copyright © 2025 www.kcadenzavg.com - 0.0216