Kia Cadenza YG: Timing System / Idler Repair procedures

Kia Cadenza YG 2016-2021 Service Manual / Engine Mechanical System / Timing System / Idler Repair procedures

Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the drive belt idler (A).
Tightening torque :
53.9 ~ 57.9 N.m (5.5 ~ 5.9 kgf.m, 39.8 ~ 42.7 lb-ft)

3.
Installation is reverse order of removal
Inspection
Check the idler for excessive oil leakage, abnormal rotation or vibration. Replace if necessary.

    Components 1. Idler

    Components 1. Drive belt tensioner

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Height Sensor Repair procedures

    Removal Height Sensor 1. Disconnect the negative (-) battery terminal. 2. Remove the height sensor linkage (A) installed on the front axle and rear axle. [Front] [Rear] Installation Height Sensor 1. Install the height sensor assembly after connecting the connector.

    Kia Cadenza YG 2016-2021 Service Manual: Start/Stop Button Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screw driver or remover, remove the center fascia lower panel (A). 3. Remove the in-car hose (A) and disconnect the connectors (B) from the heater & A/C control unit. 4.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.0209