| Specifications |
| Item | Specification |
| Power source | DC 14.4V (-) ground |
| Frequency range / Channel space | FM : 87.5 ~ 107.9 MHz / 200 KHz AM : 530 ~ 1710 KHz / 10 KHz |
| Tuning type | PLL SYNTHESIZED TUNING |
| Impedance | 2 ohm x 4 |
| Antenna | 80 pF 75 Ohm |
| Dark current | Max. 2mA (Head unit only) |
| S/N | FM : MIN 50 dB AM : MIN 45 dB |
| Item | Specification | |
| Input power (W or V) | Front | MAX 50W |
| Rear | MAX 50W | |
| Front center speaker | MAX 30W | |
| Front tweeter | MAX 40W | |
| Rear tweeter | MAX 40W | |
| Sub woofer | MAX 40W | |
| Rear surround speaker | MAX 50W | |
| Impedance (Ω) | Front | 4 ± 0.6 |
| Rear | 2.0 ± 0.3 | |
| Front center speaker | 2.0 ± 0.3 | |
| Front tweeter | 3.4 ± 0.5 | |
| Rear tweeter | 3.4 ± 0.5 | |
| Sub woofer | 2.0 ± 0.3 | |
| Rear surround speaker | 2.0 ± 0.3 | |
| Number of speaker | 12 | |
Components Location 1. AVN (A/V & Navigation head unit)2. Front tweeter speaker3. External amplifier4. Roof antenna5. Front door speaker6. Rear door speaker7.
Removal 1. Remove the trunk trim in the trunk after removing the screws and clips. (Refer to Body - "Trunk") 2. Remove the camera holder (A) as shown arrow direction, and then remove the back view camera (B). Installation 1. Install the back view camera and camera holder.
Inspection 1. Ignition "OFF" 2. Disconnect the connector of temperature control actuator. 3. Verify that the temperature control actuator operates to the hot position when connecting 12V to the terminal 3 and grounding terminal 7. Verify that the temperature control actuator operates to the cool position when connecting in the rev