Kia Cadenza YG: Hydraulic System / Valve Body Description and Operation

Kia Cadenza YG 2016-2021 Service Manual / Automatic Transaxle System / Hydraulic System / Valve Body Description and Operation

Description
The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regulator valves, oil redirection valves, shift valves, and manual valves. The body also features electronic solenoid valves that ensure smooth gear changes.

    Service Adjustment Procedure Oil level Check     When checking the oil level, be careful not to enter dust, foreign matters, etc.

    Components Location 1. PCV adjust screw2. Solenoid valve3. Oil temperature sensor4. Accumulator5. Low & reverse brake(LR/B) pressure flow hole6.

    Other information:

    Kia Cadenza YG 2016-2021 Service Manual: Pantoscopic Camera Repair procedures

    Removal Front Pantoscopic Camera 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 3. Remove the pantocscpic camera (B) after loosening the mounting screws and connector (A).

    Kia Cadenza YG 2016-2021 Service Manual: Refrigerant line Repair procedures

    Replacement 1. Discharge refrigerant from refrigeration system. 2. Replace faulty tube or hose.     Cap the open fittings immediately to keep moisture or dirt out of the system. 3. Tighten joint of bolt or nut to specified torque.

    Categories

     
    Copyright © 2026 www.kcadenzavg.com - 0.021