| Specifications |
| Item | Specification |
| Power source | DC 14.4V (-) ground |
| Frequency range / Channel space | FM : 87.5 ~ 107.9 MHz / 200 KHz AM : 530 ~ 1710 KHz / 10 KHz |
| Tuning type | PLL SYNTHESIZED TUNING |
| Impedance | 2 ohm x 4 |
| Antenna | 80 pF 75 Ohm |
| Dark current | Max. 2mA (Head unit only) |
| S/N | FM : MIN 50 dB AM : MIN 45 dB |
| Item | Specification | |
| Input power (W or V) | Front | MAX 50W |
| Rear | MAX 50W | |
| Front center speaker | MAX 30W | |
| Front tweeter | MAX 40W | |
| Rear tweeter | MAX 40W | |
| Sub woofer | MAX 40W | |
| Rear surround speaker | MAX 50W | |
| Impedance (Ω) | Front | 4 ± 0.6 |
| Rear | 2.0 ± 0.3 | |
| Front center speaker | 2.0 ± 0.3 | |
| Front tweeter | 3.4 ± 0.5 | |
| Rear tweeter | 3.4 ± 0.5 | |
| Sub woofer | 2.0 ± 0.3 | |
| Rear surround speaker | 2.0 ± 0.3 | |
| Number of speaker | 12 | |
Components Location 1. AVN (A/V & Navigation head unit)2. Front tweeter speaker3. External amplifier4. Roof antenna5. Front door speaker6. Rear door speaker7.
Removal Front Pantoscopic Camera 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 3. Remove the pantocscpic camera (B) after loosening the mounting screws and connector (A).
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the passenger compartment junction box cover. 3. Remove the driver side cover (A). 4. Remove the crash pad side switch assembly (A) by pushing it through side cover hole.