Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the specification.
Specification: Refer to “Specification”
Removal
1.
Turn the ignition switc ...
Replacement
1.
Disconnect the damper (B) from the glove box (A) and then remove the glove box lift (C).
2.
Remove the filter cover (A) with pushing the knob.
3.
Replace the air filter (B), install it after making sure of the direction of air filter.
4.
Installation is the reverse ord ...