Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC ...
Other information:
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Set up the transmission jack (A) under the lower arm ...
Inspection
1.
Open the junction box fuse cover.
2.
Insert the hand to the junction box fuse cover hole and remove the crash pad side switch assembly (A) by pushing it.
Put on gloves to protect your hands.
3.
Disconnect the switch connector.
4.
Check fo ...