Other information:
Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the drive belt idler (A).
Tightening torque :
53.9 ~ 57.9 N.m (5.5 ~ 5.9 kgf.m, 39.8 ~ 42.7 lb-ft)
3.
Installation is reverse order of removal
Inspection
Check the idler for e ...
Inspection
1.
Open the junction box fuse cover.
2.
Insert the hand to the junction box fuse cover hole and remove the crash pad side switch assembly (A) by pushing it.
Put on gloves to protect your hands.
3.
Disconnect the switch connector.
4.
Check fo ...