Kia Cadenza YG: Engine Mechanical System / Engine And Transmission Assembly
- Engine Cover Repair procedures
- Engine Room Under Cover Components and Components Location
- Engine Room Under Cover Repair procedures
- Engine Mounting Components and Components Location
- Engine Mounting Repair procedures
- Engine And Transmission Assembly Repair procedures
Troubleshooting SymptomSuspect areaRemedyEngine misfire with abnormal internal lower engine noises.Worn crankshaft bearings.Loose or damaged engine drive plate.
Removal and Installation 1. Remove the engine cover (A). • Lift up the lower end of engine cover, then left and right alternately.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Height Sensor Repair procedures
Removal Height Sensor 1. Disconnect the negative (-) battery terminal. 2. Remove the height sensor linkage (A) installed on the front axle and rear axle. [Front] [Rear] Installation Height Sensor 1. Install the height sensor assembly after connecting the connector.
Kia Cadenza YG 2016-2021 Service Manual: Photo Sensor Repair procedures
Inspection 1. Ignition "ON" 2. Using the scan tool. 3. Emit intensive light toward photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher intensive light and reduce with lower intensive light.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- High Pressure Fuel Pump Repair procedures
- Components and Components Location
- Body Electrical System
- New on site
- Most important about car
