Kia Cadenza YG: Body Electrical System / IMS (Integrated Memory)
- Specifications
- Components and Components Location
- Schematic Diagrams
- Description and Operation
- IMS (Integrated Memory System) module Repair procedures
- IMS Control Switch Schematic Diagrams
- IMS Control Switch Repair procedures
- IMS Power Seat Control Schematic Diagrams
- IMS Power Seat Control Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel (A). 3. Remove the Reinforcing panel after loosening the mounting bolt and nut.
Specifications IMS Electrical System ItemSpecificationRating voltageDC 12VOperating voltageDC 9V ~ 16VOperating temperature-30°C ~ +80°CMaintaining temperature-40°C ~ +85°CMax, humid95%Consumption currentMAX 700mADark currentBelow 2mA Motor Electrical System ItemSpecificationRating voltage13.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Blind Spot Detection Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting screws. Take care not to separate the bracket from rear bumper when removing the BSD sensor.
Kia Cadenza YG 2016-2021 Service Manual: Condenser Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2. Check the condenser connections for leakage, and repair or replace it, if required.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Schematic Diagrams
- Schematic Diagrams
- Body (Interior and Exterior)
- New on site
- Most important about car
