Kia Cadenza YG: Body Electrical System / Smart key System
- Specifications
- Components and Components Location
- Description and Operation
- Repair procedures
- Smart key Repair procedures
- Smart key unit Components and Components Location
- Smart key unit Schematic Diagrams
- Smart key unit Repair procedures
Removal • Take care not to scratch the crash pad and related parts. 1. Disconnect the negative (-) battery terminal.
Specification Smart Key Unit ItemsSpecificationRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-30°C ~ 75°C (-22°F ~ 167°F)Dark currentMax 2.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Immobilizer Control Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 3. Disconnect the 5P connector of the SMARTRA unit and then remove the SMARTRA unit (A) after loosening the bolt. Installation 1.
Kia Cadenza YG 2016-2021 Service Manual: Condenser Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2. Check the condenser connections for leakage, and repair or replace it, if required.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- High Pressure Fuel Pump Repair procedures
- Timing Chain Repair procedures
- Driveshaft and axle
- New on site
- Most important about car
