Kia Cadenza YG: Restraint
- Specifications
- Components and Components Location
- Description and Operation
- Special Service Tools
- Repair procedures
- General Information
- General Safety Information and Caution
- SRSCM
- SRS Control Module (SRSCM) Description and Operation
- SRS Control Module (SRSCM) Components and Components Location
- SRS Control Module (SRSCM) Repair procedures
- Front Impact Sensor (FIS) Description and Operation
- Front Impact Sensor (FIS) Components and Components Location
- Front Impact Sensor (FIS) Repair procedures
- Side Impact Sensor (SIS) Description and Operation
- Side Impact Sensor (SIS) Components and Components Location
- Side Impact Sensor (SIS) Repair procedures
- Seat Belt Buckle Switch (BS) Description and Operation
- Seat Belt Buckle Switch (BS) Components and Components Location
- Seat Belt Buckle Switch (BS) Repair procedures
- Occupant Detection System (ODS) Description and Operation
- Occupant Detection System (ODS) Components and Components Location
- Occupant Detection System (ODS) Repair procedures
- Schematic Diagrams
- Airbag Module
- Driver Airbag (DAB) Module and Clock Spring Description and Operation
- Driver Airbag (DAB) Module and Clock Spring Components and Components Location
- Driver Airbag (DAB) Module and Clock Spring Repair procedures
- Passenger Airbag (PAB) Module Description and Operation
- Passenger Airbag (PAB) Module Components and Components Location
- Passenger Airbag (PAB) Module Repair procedures
- Side Airbag (SAB) Module Description and Operation
- Side Airbag (SAB) Module Components and Components Location
- Side Airbag (SAB) Module Repair procedures
- Curtain Airbag (CAB) Module Description and Operation
- Curtain Airbag (CAB) Module Components and Components Location
- Curtain Airbag (CAB) Module Repair procedures
- Airbag Module Disposal Description and Operation
- Seat Belt Pretensioner
- Seat Belt Pretensioner (BPT) Description and Operation
- Seat Belt Pretensioner (BPT) Components and Components Location
- Seat Belt Pretensioner (BPT) Repair procedures
- Emergency Fastening Device (EFD) Description and Operation
- Emergency Fastening Device (EFD) Components and Components Location
- Emergency Fastening Device (EFD) Repair procedures
Replacement 1. Remove the front wheel & tire (A). Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) • Be careful not to damage to the hub bolts when removing the front wheel & tire.
Tightening Torques ItemN.mkgf.mlb-ftDriver airbag (DAB)7.8 ~ 10.80.8 ~ 1.15.8 ~ 8.0Passenger airbag (PAB)7.8 ~ 11.80.8 ~ 1.25.8 ~ 8.7Curtain airbag (CAB)Bolt9.
Other information:
Kia Cadenza YG 2016-2021 Service Manual: Compressor Repair procedures
Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative cable from the battery. 3. Recover the refrigerant with a recovery/charging station.
Kia Cadenza YG 2016-2021 Service Manual: Receiver-Drier Repair procedures
Replacement 1. Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser. Tightening torque : 9.8~14.7N.m (1.0~1.5kgf.m, 7.2~10.8 lb-ft) 2. Remove the desiccant (A) from condenser using a long nose plier.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- General Information
- Body Control Module (BCM) Description and Operation
- Engine Control / Fuel System
- New on site
- Most important about car
